22.4.1.4 show time-range
Command: show time-range<word>
Functions: Reveal configuration information of time range functions
Parameters: word assign name of time-range needed to be revealed
Default: None
Command Mode:Admin mode
Usage Guide: When not assigning time-range names, all time-range will be revealed.
Examples:
Switch#show time-range
time-range timer1 (inactive)
absolute-periodic Saturday 0:0:0 to Sunday 23:59:59
time-range timer2 (active)
absolute-periodic Monday 0:0:0 to Friday 23:59:59
22.5 Web Management
By clicking the ACL configuration icon, it will open up the ACL sub-sections which include
the following parts:
Numeric ACL Configuration -Standard and Extended types
ACL Name Configuration -Standard and Extended types
Filter Configuration -- enable global configuration and the default action to bind ACL
to the ports
22.5.1 Numeric standard ACL configuration
Click "Numeric ACL Configuration", and then "Add Standard Numeric ACL" section to
enter the configuration page. The explanations of each section are:
ACL number -1- 99
Rule -permit or deny
Source address type -Specified IP address or any randomly allocated IP address
Source IP address
Reverse network mask
Specify the number in the ACL number section and the relative values in the other 4
sections, then click "Add", the users can then add the new Numeric Standard IP ACL.
812