Edge-Core ES4626 User Manual page 78

supplied
encoding errors
number of requested variables
number of altered variables
get-request PDUs
get-next PDUs
set-request PDUs
snmp packets output
too big errors
maximum packet size
no such name errors
bad values errors
general errors
response PDUs
trap PDUs
2.4.3.3 show snmp status
Command: show snmp status
Function: Display SNMP configuration information.
Command mode: Admin Mode
Example:
Switch#show snmp status
Trap enable
RMON enable
Community Information:
V1/V2c Trap Host Information:
V3 Trap Host Information:
Security IP Information:
Displayed information
Community string
name error packets.
Number of encoding error packets.
Number of variables requested by NMS.
Number of variables set by NMS.
Number of packets received by "get"
requests.
Number of packets received by "getnext"
requests.
Number of packets received by "set"
requests.
Total number of SNMP packet outputs.
Number of "Too_ big" error SNMP
packets.
Maximum length of SNMP packets.
Number of packets
non-existent MIB objects.
Number of "Bad_values" error SNMP
packets.
Number of "General_errors" error SNMP
packets.
Number of response packets sent.
Number of Trap packets sent.
Description
Community string
78
requesting for