Edge-Core ES4626 User Manual page 605

connections. The "no neighbor {<ip-address>|<TAG>} strict-capability-match"
command set to not requiring strict match.
Parameter: <ip-address>: Neighbor IP address
<TAG>: Name of peer group
Default: No strict capability match configured
Command Mode: BGP mode and address-family mode.
Usage Guide: With this command, the connection can only be established when the
both side are perfectly matched on capabilities.
Example:Switch(config-router)#neighbor 10.1.1.64 strict-capability-match
17.8.3.72 neighbor timers
Command: neighbor {<ip-address>|<TAG>} timers <0-65535> <0-65535>
no neighbor {<ip-address>|<TAG>} timers <0-65535> <0-65535>
Function: Configure the KEEPALIVE interval and hold time; the "no neighbor
{<ip-address>|<TAG>} timers <0-65535> <0-65535>" command restores the defaults
Parameter: Neighbor IP address
<TAG>: Name of peer group
<0-65535>: Respectively the KEEPALIVE and HOLD TIME
Default: Default KEEPALIVE time is 60s, while HOLD TIME is 240s
Command Mode: BGP mode and address-family mode
Usage Guide: Send KEEPALIVE interval and HOLD TIME intervals sent in the peer
connection. The hold time is the time period for maintain the connection when no
message is received from the partner (such as KEEPALIVE). And the connection will be
closed after this hold time.
Example: Switch(config-router)#neighbor 10.1.1.64 timers 50 200
17.8.3.73 neighbor timers connect
Command: neighbor {<ip-address>|<TAG>} timers connect <0-65535>
no neighbor {<ip-address>|<TAG>} timers connect [<0-65535>]
Configure
Function:
{<ip-address>|<TAG>} timers connect [<0-65535>]" command restores the default
value
Parameter: <ip-address>: Neighbor IP address
<TAG>: Name of peer group
<0-65535>: Retry interval
Default: 120s.
Command Mode: BGP mode and address-family mode
Usage Guide: Configure the connecting time interval when connecting a peer. The NO
the connecting retry
605
time interval. The "no
neighbor