Edge-Core ES4626 User Manual page 509

bgp introduce from BGP route
metric <value> is the introduced metric value, ranging between 0-16777214
metric-type {1|2} is the metric value type of the introduced external route, which
can be 1 or 2, and it is 2 by default
route-map <word> point to the probe of the route map for introducing route
tag<tag-value> external identification number of the external route, ranging
between 0~4294967295, defaulted at 0
Command Mode: OSPF mode
Usage Guide: Learn and introduce other routing protocol into OSPF area to generate
AS-external_LSAs
Example: Switch#config terminal
Switch(config)#router ospf
Switch(config-router)#redistribute bgp metric 12
17.6.3.39 router ospf
Command: [no] router ospf <process_id> <vrf-name>
Function: This command is for relating the OSPF process and a specific VPN. All
configuration commands will be related to this VPN after the configuration succeeded.
The "[no] router ospf <process_id> <vrf-name>" command deletes the VPN
routing/forwarding instance related OSPF instances.
Parameter: <process_id> specifies the id of the OSPF process to be created.
<vrf-name> specifies the name of VPN routing/forwarding instance
Command Mode: Global mode
Usage Guide: This command is only used for PE router. A VPN routing/forwarding
instance should be generated with ip vrf command before using this command, then with
this command you can relate OSPF instances to this VPN routing/forwarding instance
Example: Switch# config terminal
Switch(config)# router ospf 100 VRF1
Switch(config-router)#network 10.1.1.0/24 area 0
17.6.3.40 default-information originate
Command: default-information originate
[always|METRIC|METRICTYPE|ROUTEMAP]
no default-information originate
Function: This command create a default external route to OSPF route area; the "no
default-information originate" closes this feature
Parameter: always: Whether default route exist in the software or not, the default route
is always advertised.
509