Edge-Core ES4626 User Manual page 261

Global Mode
policy-map <policy-map-name>
no policy-map <policy-map-name>
class <class-map-name>
no class <class-map-name>
set {ip dscp <new-dscp> | ip precedence
<new-precedence>|ipv6 dscp <new-dscp>
| ipv6 flowlabel <new-flowlabel>|cos<new
cos>}
no set {ip dscp | ip precedence|ipv6 dscp
| ipv6 flowlabel |cos<new cos>}
police <rate-kbps>
[exceed-action
policed-dscp-transmit}]
no police <rate-kbps>
[exceed-action
policed-dscp-transmit}]
mls qos
<aggregate-policer-name>
<burst-kbyte> exceed-action
|policed-dscp-transmit}
no mls qos
<aggregate-policer-name>
police
<aggregate-policer-name>
no police
<aggregate-policer-name>
<burst-kbyte>
{drop |
<burst-kbyte>
{drop |
aggregate-policer
<rate-kbps>
{drop
aggregate-policer
aggregate
aggregate
261
Create a policy map and enter policy
map mode; the "no policy-map
<policy-map-name>"
deletes the specified policy map.
After a policy map is created, it can be
associated to a class. Different policy
or new DSCP value can be applied to
different data streams in class mode;
the "no class <class-map-name>"
command deletes the specified class.
Assign a new
precedence value for the classified
traffic; the "no set {ip dscp | ip
precedence|ipv6 dscp
flowlabel |cos<new
command cancels the newly assigned
value.
Configure a policy to classify traffic,
data stream exceeding the limit will be
dropped or degraded; the "no police
<rate-kbps>
[exceed-action
policed-dscp-transmit}]"
deletes the specified policy.
Define a policy set, perform different
actions to out-of-profile data streams,
such as discard or degrade. This
policy can be used in one policy map
by several classes; the "no mls qos
aggregate-policer
<aggregate-policer-name>"
command deletes the specified policy
set.
Apply a policy set to classified traffic;
the "no
police
<aggregate-policer-name>"
command deletes the specified policy
command
DSCP and IP
| ipv6
cos>}"
<burst-kbyte>
{drop |
command
aggregate