Edge-Core ES4626 User Manual page 291

ipv6 address <ipv6-address/prefix-length>
[eui-64]
no ipv6 address <ipv6-address/prefix-length>
(3). Set IPv6 Static Routing
Command
Global mode
[no] ipv6 route <iPv6-prefix/prefix-length>
{<nexthop-Ipv6-address>|<interface-type
interface-number>|{<nexthop-Ipv6-address>
<interface-type interface-number>}} [distance]
2. IPv6 Neighbor Discovery Configuration
（1）Configure DAD Neighbor Query Message number
Command
Interface Configuration Mode
[no] ipv6 nd dad attempts
<value>
（2）Configure Send Neighbor Query Message Interval
Command
Interface Configuration Mode
[no] ipv6 nd ns-interval
<seconds>
（3）Forbid Router announce
Command
Interface Configuration Mode
[no] ipv6 nd suppress-ra
（4）Configure Router Announce Lifespan
Command
Configure
including aggregatable global
unicast addresses, local site
addresses
addresses.
address
<ipv6-address/prefix-length>
command
address.
Description
Configure IPv6 static routing.
The NO command cancels
IPv6 static routing.
Explanation
Set the neighbor query message number sent
in sequence when the interface makes
repeating address check. The NO command
resumes default value (1).
Explanation
Set the interval of the interface to send
neighbor query message. The NO command
resumes default value (1 second).
Explanation
Forbid IPv6 Router Announce. The NO
command enables IPv6 router announce.
Explanation
291
IPv6 address,
and local link
The
no ipv6
cancels IPv6