Edge-Core ES4626 User Manual page 83

Displayed Information
User name
Engine ID
Priv Protocol
Auth Protocol
Row status
2.4.3.14 show snmp view
Command: show snmp view
Function:Display the view information commands.
Command Mode: Admin Mode
Example:
Switch#show snmp view
View Name:readview
1.3. - Excluded
Displayed Information
View Name
1.and1.3.
Included
Excluded
active
2.4.3.15 snmp-server engineid
Command: snmp-server engineid < engine-string >
no snmp-server engineid < engine-string >
Function: Configure the engine ID; the "no" form of this command restores to the default
engine ID
Command Mode:Global mode
Parameter：<engine-string> is the engine ID shown in 1-32 digit hex characters
Default：Default value is the company ID plus local MAC address
Usage Guide:
Example: Set current engine ID to A66688999F
Switch(config)#snmp-server engineid A66688999F
Restore the default engine ID
Explanation
User name
Engine ID
Employed encryption algorithm
Employed identification algorithm
User state
1. -Included
active
Explanation
View name
OID number
The view includes sub trees rooted by
this OID
The view does not include sub trees
rooted by this OID
State
83
active