Commands For Sflow - Edge-Core ES4626 User Manual

sflow
<collector-address>
no sflow agent-address
3. Configure the sFlow proxy priority
Command
Global Mode
sflow priority <priority-vlaue>
no sflow priority
4. Configure the packet head length copied by sFlow
Command
Global Mode
sflow header-len <length-vlaue>
no sflow header-len
5. Configure the max data head length of the sFlow packet
Command
Interface Mode
sflow data-len <length-vlaue>
no sflow data-len
6. Configure the sampling rate value.
Command
Interface Mode
sflow rate { input <input-rate> | output
<output-rate >}
no sflow rate [input | output]
7. Configure the Sflow statistic sampling interval
Command
Interface Mode
sflow counter-interval <interval-vlaue>
no sflow counter-interval

2.8.3 Commands For sFlow

Configure the source IP address applied by
agent-address
the sFlow proxy; the "no" form of the
command deletes this address.
Explanation
Configure the priority when sFlow receives
packet from the hardware; the "no sflow
priority" command restores to the default
Explanation
Configure the length of the packet data
head copied in the sFlow data sampling;
the "no" form of this command restores to
the default value.
Explanation
Configure the max length of the data
packet in sFlow; the "no" form of this
command restores to the default.
Explanation
Configure the sampling rate when sFlow
performing hardware sampling. The "no"
command deletes the rate value.
Explanation
Configure the max interval when sFlow
performing statistic sampling. The "no" form
of this command deletes
113