Edge-Core ES4626 User Manual page 93

switch. In ES4626/ES4650 switch, the running configuration file stores in the RAM. In the
current version, the running configuration sequence running-config can be saved from
the RAM to FLASH by write command or copy running-config startup-config
command, so that the running configuration sequence becomes the start up configuration
file, which is called configuration save. To prevent illicit file upload and easier
configuration, ES4626/ES4650 switch mandates the name of running configuration file to
be running-config.
Factory configuration file: The configuration file shipped with ES4626/ES4650 switch in
the name of factory-config. Run set default and write, and restart the switch, factory
configuration file will be loaded to overwrite current start up configuration file.
2.5.3.2 FTP/TFTP Configuration
The configurations of ES4626/ES4650 switch as FTP and TFTP clients are almost
the same, so the configuration procedures for FTP and TFTP are described together in
this manual.
2.5.3.2.1 FTP/TFTP Configuration Task List
1. FTP/TFTP client configuration
Upload/download the configuration file or system file.
（1） For FTP client, server file list can be checked.
2. FTP server configuration
（1） Start FTP server
（2） Configure FTP login username and password
（3） Modify FTP server connection idle time
（4） Shut down FTP server
3. TFTP server configuration
（1） Start TFTP server
（2） Configure TFTP server connection idle time
（3） Configure
acknowledgement
（4） Shut down TFTP server
1. FTP/TFTP client configuration
（1）FTP/TFTP client upload/download file
Command
Admin Mode
copy <source-url> <destination-url>
[ascii | binary]
（2）For FTP client, server file list can be checked.
retransmission times
93
before timeout
Explanation
FTP/TFTP client upload/download file
for packets without