Edge-Core ES4626 User Manual page 441

（3）Configure other RIP protocol parameters
1）Configure RIP routing priority
2）Configure the RIP route capacity limit in route table
3）Configure timer for RIP update, timeout and hold-down
4）Configure RIP UDP receiving buffer size
Command
Router configuration mode
distance <number> [<A.B.C.D/M> ]
[<access-list-name|access-list-numb
er >]
no distance [<A.B.C.D/M> ]
maximum-prefix
<maximum-prefix>[<threshold>]
no maximum-prefix <maximum-prefix
>
no maximum-prefix
timers basic <update>
<garbage>
no timers basic
recv-buffer-size <size>
no recv-buffer-size
3. Configure RIP-I/RIP-II toggling
（1）Configure the RIP version to be used in all ports
Command
RIP configuration mode
version { 1 | 2 }
no version
（2）Configure the RIP version to send/receive in all ports.
（3）Configure whether to enable RIP packets sending/receiving for ports
Command
Interface configuration mode
Explanation
Specify the route administratively distance of
RIP
[<A.B.C.D/M> ] command restore the default
value 120
Configure the maximum of RIP route; the no
maximum-prefix <maximum-prefix >
no maximum-prefix command cancels the
limit
Adjust the update, timeout and garbage
<invalid>
collection
command restore the default configuration
The command configures the UDP receiving
buffer
recv-buffer-size
system default values
Explanation
Configure the versions of all the RIP data
packets transmitted/received by the Layer 3
switch port sending/receiving the no version
command restores the default configuration,
version 2.
Explanation
441
protocol; the
time, the
no
size of the
command
no distance
timers basic
RIP; the
no
restore the