Edge-Core ES4626 User Manual page 906

Command
Global Mode
cluster commander <cluster-name>
[vlan<vlan-id>]
no cluster commander
cluster ip-pool<commander-ip>
no cluster ip-pool
cluster member {candidate-sn <cand-sn> |
mac-address
[<mem-id>] }[password <pass>]
no cluster member < mem-id >
3.Configure attributes of the cluster in the commander switch
Command
Global Mode
cluster auto-add enable
no cluster auto-add enable
cluster holdtime < second>
no cluster holdtime
cluster heartbeat <interval>
no cluster heartbeat
clear cluster candidate-table
4. Configure attributes of the cluster in the candidate switch
Command
Global Mode
cluster register timer <timer-value>
no cluster register timer
5. Remote cluster network management
Explanation
Create or delete a cluster
Configure private IP address pool
for member switches of the cluster
<mac-add>
Add or remove a member switch
Explanation
Enable or disable adding newly discovered
candidate switch to the cluster
Set holdtime of heartbeat of the cluster
Set interval of sending heartbeat packets
among the switches of the cluster
Clear the list of candidate switches
discovered by the commander switch
Explanation
Set interval of sending cluster register
packet
906