Edge-Core ES4626 User Manual page 802

Default: No time-range configuration
Usage Guide: Absolute time and date, assign specific year, month, day, hour, minute of
the start, shall not configure multiple absolute time and date, when in repeated
configuration, the latter configuration covers the absolute time and date of the former
configuration.
Examples: Make configurations effective from 6:00:00 to 13:30:00 from Oct. 1, 2004 to
Jan. 26, 2005.
Switch(config)#Time-range doc_timer
Switch ( Config-Time-Range) # absolute start 6:00:00 2004.10.1 end 13:30:00 2005.1.26
22.2.2.3 access-list(ip extended)
Command: access-list <num> {deny | permit} icmp {{<sIpAddr> <sMask>} |
any-source | {host-source <sIpAddr>}} {{<dIpAddr> <dMask>} | any-destination |
{host-destination <dIpAddr>}} [<icmp-type> [<icmp-code>]] [precedence <prec>]
[tos <tos>][time-range<time-range-name>]
access-list <num> {deny | permit} igmp {{<sIpAddr> <sMask>} | any-source |
{host-source <sIpAddr>}}
{host-destination
<tos>][time-range<time-range-name>]
access-list <num> {deny | permit} tcp {{<sIpAddr> <sMask>} | any-source |
{host-source <sIpAddr>}} [s-port {<sPort> | range <sPortMin> <sPortMax>}]
{{<dIpAddr> <dMask>} | any-destination | {host-destination <dIpAddr>}} [d-port
{<dPort> | range <dPortMin> <dPortMax>}] [ack+ fin+ psh+ rst+ urg+ syn]
[precedence <prec>] [tos <tos>][time-range<time-range-name>]
access-list <num> {deny | permit} udp {{<sIpAddr> <sMask>} | any-source |
{host-source <sIpAddr>}} [s-port {<sPort> | range <sPortMin> <sPortMax>]
{{<dIpAddr> <dMask>} | any-destination | {host-destination <dIpAddr>}} [d-port
{<dPort> | range
<tos>][time-range<time-range-name>]
access-list <num> {deny | permit} {eigrp | gre | igrp | ipinip | ip | <protocol>}
{{<sIpAddr> <sMask>} | any-source | {host-source <sIpAddr>}} {{<dIpAddr>
<dMask>} | any-destination | {host-destination <dIpAddr>}} [precedence <prec>]
[tos <tos>][time-range<time-range-name>]
no access-list <num>
Functions: Create a numeric extended IP access rule to match specific IP protocol or all
IP protocol; if access-list of this coded numeric extended does not exist, thus to create
such a access-list.
Parameters: <num> is the No. of access-list, 100-199; <protocol> is the No. of
{{<dIpAddr>
<dIpAddr>}} [<igmp-type>]
<dPortMin> <dPortMax>}]
<dMask>}
[precedence
[precedence
802
| any-destination
<prec>]
<prec>]
|
[tos
[tos