Edge-Core ES4626 User Manual page 689

Function: Display PIM interface information
Parameter: None
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: Display PIM interface information
Example: testS2(config)#show ip pim interface
Address Interface VIFindex Ver/
10.1.4.3 Vlan1
10.1.7.1 Vlan2
Displayed Information
Address
Interface
VIF index
Ver/Mode
Nbr Count
DR Prior
DR
20.3.5.1.13 show ip pim mroute sparse-mode
Command: show ip pim mroute sparse-mode [group <A.B.C.D>] [source
<A.B.C.D>]
Function: Display the multicast route table of PIM-SM.
Parameter: group <A.B.C.D>: Display redistributed items that related to this multicast
address
source <A.B.C.D>: Display redistributed items that related to this source
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: Display the BSP routers in the network maintained by PIM-SM.
Example: testS2#show ip pim mroute sparse-mode
IP Multicast Routing Table
(*,*,RP) Entries: 0
(*,G) Entries: 1
(S,G) Entries: 0
(S,G,rpt) Entries: 0
(*, 239.192.1.10)
Nbr
Mode Count Prior
0 v2/S 1
2 v2/S 0
Explanations
Interface address
Interface name
Interface index
Pim version and mode,usually v2,sparse
mode displays S,dense mode displays D
The interface's neighbor count
Dr priority
The interface's DR address
689
DR DR
1 10.1.4.3
1 10.1.7.1