Edge-Core ES4626 User Manual page 563

BGP configuration mode
neighbor {<ip-address>|<TAG>}
ebgp-multihop [<1-255>]
no neighbor {<ip-address>|<TAG>}
ebgp-multihop [<1-255>]
8．Configure BGP session identifier
Command
BGP configuration mode
bgp router-id <ip-address>
no bgp router-id
9． Configure the BGP Version
Command
BGP configuration mode
neighbor {<ip-address> | <TAG>}
version <value>
no neighbor {<ip-address> | <TAG>}
version
Ⅱ．Advanced BGP configuration tasks
1．Use Route Maps to Modify Route
Command
BGP configuration mode
neighbor { <ip-address>
route-map <map-name > {in | out}
no neighbor { <ip-address> | <TAG> }
route-map <map-name > {in | out}
2．Configure Route Aggregation
Command
Configure the allowance of EBGP
connection with other networks that are
not connected directly; the no neighbor
{<ip-address>|<TAG>} ebgp-multihop
[<1-255>]
setting.
Explanation
Configure the router-id value; the no bgp
router-id command recovers the default
value.
Explanation
Set the version used by BGP neighbors;
the no neighbor {<ip-address> |
<TAG>} version command recovers
default setting.
supporting version 4
Explanation
Apply a route map to incoming
or outgoing routes; the no
| <TAG> }
neighbor
<TAG>
<map-name
command cancels the settings
of routing maps.
Explanation
563
command cancels
Presently
th
.
{ <ip-address>
} route-map
> {in |
the
only
|
out}