Edge-Core ES4626 User Manual page 465

Command Mode: Any mode
Example: Switch# show ip rip interface vlan 1
Vlan1 is up, line protocol is up
Routing Protocol: RIP
Receive RIP packets
Send RIP packets
Passive interface: Disabled
Split horizon: Enabled with Poisoned Reversed
IP interface address:
10.1.1.1/24
17.4.5.1.7 show ip rip interface vrf
Command: show ip rip interface vrf <vrf-name>[<ifname>]
Function: This command shows RIP interface relevant to VPN routing/forwarding
instances
Parameter: Specifies the name of VPN routing/forwarding instances
<ifname> is the name of the interfaces
Command Mode: Any mode
Example: Switch# show ip rip interface vrf IPI Vlan1
Ethernet1/1 is up, line protocol is up
Routing Protocol: RIP
VPN Routing/Forwarding: vpnb
Receive RIP packets
Send RIP packets
Passive interface: Disabled
Split horizon: Enabled with Poisoned Reversed
IP interface address:11.1.1.1/24
Displayed information
Vlan1 is up, line protocol is up
Routing Protocol: RIP
VPN Routing/Forwarding: vpnb
Receive RIP packets
Send RIP packets
Passive interface: Disabled
Split horizon: Enabled
Reversed
IP interface address:11.1.1.1/24
Explanations
Interface is up
The protocol running on the interface is
RIP
Interface
routing/forwarding instances.
The interface can receive RIP packets
The interface can send RIP packets
Passive-interface disabled
with Poisoned Configure a split horizon with poison
reversed
The IP address of the interface.
465
relates to the VPN