Edge-Core ES4626 User Manual page 775

<.X:X::X:X>
no ipv6 mld join-group <X:X::X:X> source <.X:X::X:X>
Function: Configure the sources of certain multicast group which the interface join in.
Note: because of the client group has got only INLCUDE and EXCLUDE modes, if the
source mode is not in accordance with current mode configured, the group mode will be
changed and the original sources of the other modes configured will be cleared
permanently; the "no" form of this command cancels joining certain group.
Parameter: <X:X::X:X> is a valid IPv6 multicast address
<include|exclude>
<.X:X::X:X>
Default: No multicast group to be joined by factory default
Command Mode: Interface Mode
Usage Guide: The address range of the IPv6 multicast is FFxy::/8, however the
(FF02::/16) is permanent addresses which can not be joined in. As for sources with mode
same as the original one, the source will be added, while for those with different modes,
the original sources will be cleared.
Example:
Join vlan2 in multicast group with multicast address of ff1e::1:3, with sources 2003::1 and
2003::2 in INCLUDE mode.
Switch(Config)#interface vlan 2
Switch(Config-if-Vlan2)#ipv6 mld join-group ff1e::1:3 mode include source 2003::1
2003::2
21.3.3.10 ipv6 mld limit
Command:ipv6 mld limit <state-count>
no ipv6 mld limit
Function:Configure the MLD state count limit of the interface; the "no ipv6 mld limit"
command restores the manually configured value to default value
Parameter:<state-count>:max MLD state the interface maintains, the valid range is
1-5000.
Default: 400 by default
Command Mode: Interface Mode
Usage Guide:When max state-count is configured, the number of the state the interface
saves will only upper to the state-count limit; and when the max state-count is reached,
the later new member qualification report received will be ignored. If some MLD group
state has already been saved before this command configured, the original states will be
removed and the MLD general query will be sent to collect group member qualification
reports no more than the max state-count.
： joining mode
： source list, configure several sources is allowed.
775