Edge-Core ES4626 User Manual page 125

State -"Valid" -to configure; "Invalid" -to remove
Example: configure the Trap receiver as "41.1.1.100" and configure the community string
as "trap" and State as "Valid." The command will be applied to the switch by clicking on
the "Apply" button.
2.10.2.3 Configure IP address of SNMP manager
User should click "Switch basic configuration", "SNMP configuration", and "Configure ip
address of snmp manager" to configure the security IP address which will be allowed to
access to the NMS management station of the switch. 5.4.4.2.6.
Security ip address -Security IP address of NMS
State –"Valid" -to configure; "Invalid" -to remove
Example: configure the security IP address as "41.1.1.100", and choose State as "Valid".
The command will be applied to the switch by clicking on the "Apply" button.
2.10.2.4 SNMP statistics
When users click "Switch basic configuration", "SNMP configuration" and "SNMP
statistics", a variety of counter information will appear.
125