Edge-Core ES4626 User Manual page 600

Default: No prefix restrictions applied
Command Mode: BGP mode and address-family mode
Usage Guide: Specify the prefix and its scope by configuring ip prefix-list and determines
whether this scope is permitted or denied. Only the route with permitted prefix will be sent
or received
Example:
Switch(config)#ip prefix-list prw permit 100.1.0.0/22 ge 23 le 25
Switch(config)#router bgp 200
Switch(config-router)#redistribute static
Switch(config-router)neighbor 10.1.1.66 prefix-list prw out
17.8.3.62 neighbor remote-as
Command: neighbor {<ip-address>|<TAG>} remote-as <as-id>
no neighbor {<ip-address>|<TAG>} [remote-as <as-id>]
Function: Configure the BGP neighbor. The "no neighbor {<ip-address>|<TAG>}
[remote-as <as-id>]" command is used for deleting BGP neighbors.
Parameter: <ip-address>: Neighbor IP address
<TAG>: Name of peer group
<as-id>: Neighbor AS number ranging between 1-65535
Default: No neighbors
Command Mode: BGP mode and address-family mode
Usage Guide:The BGP neighbors are completely generated through command
configurations. A neighbor relationship can only be really established by mutual
configuring. Partner AS number should be specified in configuration. The neighbor
relationship can not be established when the AS number is incorrect. The partner AS
number is the same with that of local side inside the AS
Example:
Switch(config)#router bgp 200
Switch(config-router)# neighbor 10.1.1.64 remote-as 100
17.8.3.63 neighbor remove-private-AS
Command: neighbor {<ip-address>|<TAG>} remove-private-AS
no neighbor {<ip-address>|<TAG>} remove-private-AS
Function: Configures whether remove the private AS number when sending to the
neighbor. The "no neighbor {<ip-address>|<TAG>} remove-private-AS" command
cancels this configuration.
Parameter: <ip-address>: Neighbor IP address
<TAG>: Name of peer group
600