Edge-Core ES4626 User Manual page 534

[no] IPv6 router ospf {area <area-id>
[instance-id <instance-id> | tag <tag>
[instance-id <instance-id>]]
<tag> area <area-id> [instance-id
<instance-id>]}
2. Configure OSPFv3 parameters
（1）Configure OSPFv3 package sending mechanism parameters
1）Set the OSPF interface to receive only
2）Configure the cost for sending packages from the interface
Commands
Interface Configuration Mode
IPv6 ospf
[instance-id <id>]
no IPv6 ospf cost [instance-id
<id>]
3） Configure OSPFv3 package sending timer parameter (timer of broadcast interface
sending HELLO package to poll, timer of neighboring layer3 switch invalid timeout, timer
of LSA transmission delay and timer of LSA retransmission.
Commands
Interface Configuration Mode
IPv6 ospf hello-interval <time>
[instance-id <id>]
no IPv6 ospf
[instance-id <id>]
IPv6 ospf dead-interval <time>
[instance-id <id>]
no IPv6 ospf
[instance-id <id>]
IPv6 ospf transit-delay <time>
[instance-id <id>]
no IPv6 ospf
[instance-id <id>]
| tag
Explanation
cost <cost>
Appoint interface to implement required cost
of OSPFv3 protocol. The no IPv6 ospf cost
[instance-id <id>] restores the default setting
Explanation
Sets interval for sending HELLO packages;
the "no IPv6 ospf hello-interval [instance-id
hello-interval
<id>]" command restores the default setting.
Sets the interval before regarding a neighbor
layer3 switch invalid; the "no IPv6 ospf
dead-interval [instance-id <id>]" command
dead-interval
restores the default setting.
Sets the delay time before sending link-state
broadcast; the "no IPv6 ospf transit-delay
[instance-id <id>]" command restores the
transit-delay
default setting.
Implement ospfv3 routing on the interface.
The
[no] IPv6
<area-id> [instance-id <instance-id> |
tag <tag> [instance-id <instance-id>]] |
tag <tag> area <area-id> [instance-id
<instance-id>]}
configuration.
534
router ospf {area
command cancels