Edge-Core ES4626 User Manual page 489

ip ospf retransmit <time>
no ip ospf retransmit
（2）Configure OSPF route introduction parameters
Configure the routes of the other protocols to introduce to OSPF.
Command
OSPF protocol configuration mode
redistribute { bgp | connected | static
| rip | kernel} [ metric-type { 1 | 2 } ]
[ tag <tag> ] [ metric <cost_value> ]
[router-map <WORD>]
no redistribute { bgp | connected |
static | rip | kernel }
（3）Configure other OSPF protocol parameters
1）configure how to calculate OSPF spf algorithm time
2）configure the LSA limit in the OSPF link state database
3）Configure various OSPF parameters
Command
OSPF protocol configuration mode
timers spf <interval>
no timers spf
overflow database {<max-LSA> [hard |
soft] | external <max-LSA> <recover
time>}
no overflow
max-LSA > < recover time >]
database [external
Sets the interval
link-state advertisement
layer3 switches; the "no ip ospf retransmit"
command restores the default setting.
Explanation
Distribute other protocols to find routing
and static routings as external routing
messages the no redistribute { bgp |
connected | static | rip | kernel }
command cancels the distributed external
messages.
Explanation
configure the SPF timer of OSPF; the
no timers spf command restores the
default settings
Configure the LSA limit in current
OSPF process database; the no
overflow database
< max-LSA > < recover time >]
command
settings.
489
for retransmission
among neighbor
[external
restores the default
of
<