Edge-Core ES4626 User Manual page 810

Usage Guide: When not assigning names of ACL, all ACL will be revealed, used x time
（s）indicates the times of ACL to be used.
Examples:
Switch#show access-lists
access-list 10(used 0 time(s))
access-list 10 deny any-source
access-list 100(used 1 time(s))
access-list 100 deny ip any-source any-destination
access-list 100 deny tcp any-source any-destination
access-list 1100(used 0 time(s))
access-list 1100 permit any-source-mac any-destination-mac tagged-eth2 14 2 0800
access-list 3100(used 0 time(s))
access-list 3100 deny any-source-mac any-destination-mac udp any-source s-port
100 any-destination d-port 40000
Displayed information
access-list 10(used 1 time(s))
access-list 10 deny any-source
access-list 100(used 1 time(s))
access-list 100 deny ip any-source
any-destination
access-list 100 deny tcp any-source
any-destination
access-list 1100 permit any-source-mac
any-destination-mac tagged-eth2 14 2
0800
access-list 3100 permit any-source-mac
any-destination-mac
s-port 100 any-destination d-port 40000
22.4.1.2 show access-group
Command: show access-group [interface [Ethernet] <name>]
Functions: Reveal tying situation of ACL on port
Parameters:<name>,Interface name
Explanation
Number ACL10, 0 time to be used
Deny any IP packets to pass
Number ACL10, 1 time to be used
Deny IP packet of any source IP address
and destination address to pass
Deny TCP packet of any source IP
address and destination address to pass
Permit tagged-eth2 with any source MAC
addresses and any destination MAC
addresses and the packets whose 15
and 16
pass
Deny the passage of UDP packets with
udp any-source any source MAC address and destination
MAC address, any source IP address and
destination IP address, and source port
100 and destination interface 40000
810
th
byte is respectively 0x08 , 0x0 to
th