Edge-Core ES4626 User Manual page 508

Switch(config)#router ospf
Switch(config-router)#overflow database 10000 soft
17.6.3.36 overflow database external
Command: [no]overflow database external [<maxdbsize > <maxtime>]
Function: The command is for configuring the size of external link database and the
waiting time before the route exits overflow state. The "[no]overflow database external
[<maxdbsize > <maxtime>]" restores the default value
Parameter: < maxdbsize > size of external link database, ranging between
0~4294967294 , defaulted at 4294967294
< maxtime > the seconds the router has to wait before exiting the database overflow,
ranging between 0~65535
Command Mode: OSPF protocol mode
Example: Switch#config terminal
Switch(config)#router ospf
Switch(config-router)#overflow database external 5 3
17.6.3.37 passive-interface
Command: [no] passive-interface<ifname>
Function: Configure that the hello group not sent on specific interfaces. The "[no]
passive-interface<ifname>" command cancels this function
Parameter: <ifname> is the specific name of interface
<ip-address> IP address of the interface, shown in dotted decimal notation
Default: Not configured
Command Mode: OSPF protocol mode
Example: Switch#config terminal
Switch(config)#router ospf
Switch(config-router)#passive-interface vlan1
17.6.3.38 redistribute
Command: [no]redistribute {kernel |connected| static| rip| isis| bgp} [metric<value>]
[metric-type {1|2}][route-map<word>][tag<tag-value>]
Function: Introduce route learnt from other routing protocols into OSPF
Parameter: kernel introduce from kernel route
connected introduce from direct route
static introduce from static route
rip introduce from the RIP route
isis introduce from ISIS route
508