Edge-Core ES4626 User Manual page 43

2.1.1.16 language
Command: language {chinese|english}
Function: Set the language for displaying the help information.
Parameter: Chinese for Chinese display; English for English display.
Command mode: Admin Mode
Default: The default setting is English display.
Usage Guide: ES4626/ES4650 switch provides help information in two languages, the
user can select the language according to their preference. After the system restart, the
help information display will revert to English.
2.1.1.17 login local
Command：login local
no login
Function： Login enables local user name and password identification, no login cancels
login local configuration.
Command Mode： Global Mode
Default： System Default is no login.
Usage Guide： The command enable the user access in common mode of shell, types in
user name and password configured by username command, and then can access in
common user mode through level configured by the command. No login cancels login
local configuration.
Notice： Executing the command, it insures that priority of one user is 15, if it uses
username command configuration to login. Only this can ensure that the user accesses
from common mode to admin mode and modify system configuration after the user pass
the shell login identification. If there is no user of priority 15, the user can not access in
admin and global mode.
Example： Enable local use password identification
Switch(Config)#login local
2.1.1.18 password
Command: password <password>
no password
Function: Configure the password used for enter normal user mode on the console. The
"no password" command deletes this password
Parameter: password is the configured code. Encryption will be performed by entering 8
Command mode: Global mode
Default: This password is empty by system default
43