Dhcp Server Configuration Commands - Edge-Core ES4626 User Manual

ip dhcp
<low-address> [<high-address>]
no ip dhcp
<low-address> [<high-address>]
(3) Configure manual DHCP address pool parameters
Command
DHCP Address Pool Mode
hardware-address
<hardware-address>
IEEE802|<type-number>}]
no hardware-address
host <address>
<prefix-length> ]
no host
client-identifier <unique-identifier>
no client-identifier
client-name <name>
no client-name
3. Enable logging for address conflicts
Command
Global Mode
ip dhcp conflict logging
no ip dhcp conflict logging
Admin Mode
clear ip dhcp conflict <address | all>

11.2.2 DHCP Server Configuration Commands

11.2.2.1 bootfile
Command: bootfile <filename>
no bootfile
Function: Sets the file name for DHCP client to import on boot up; the "no bootfile
" command deletes this setting.
Parameters: <filename> is the name of the file to be imported, up to 255 characters are
allowed.
excluded-address
excluded-address
[{Ethernet |
[<mask> |
329
Excludes the addresses in the address
pool that are not for dynamic allocation.
Explanation
Specifies the hardware address when
assigning address manually
Specifies the IP address to be assigned to
the specified client when binding address
manually
Specifies the unique ID of the user when
binding address manually
Configures a client name when binding
address manually
Explanation
Enables logging for DHCP address to
detect address conflicts
Deletes a single address conflict record or
all conflict records