Edge-Core ES4626 User Manual page 162

partner_oper_port_state: _TA___F_
Displayed information
portnumber
actor_port_agg_id
partner_oper_sys
partner_oper_key
actor_oper_port_key
mode of the port
mac_type
speed_type
duplex_type
port_type
mux_state
rcvm_state
prm_state
3. Display load balance information for port-group 1.
Switch# show port-group 1 load-balance
The loadbalance of the group 1 based on src MAC address.
4. Display member port information for port-group 1.
Switch# show port-group 1 port
Sorted by the ports in the group 1 :
--------------------------------------------
the portnum is 1
Ethernet port 1/1 related information:
Actor part
port number
port priority
aggregator id
port key
port state
LACP activity
LACP timeout
Aggregation
Synchronization
Collecting
Explanation
Port number
The channel number to add the port to. If the port cannot be added to
the channel due to inconsistent parameters between the port and the
channel, 3 will be displayed.
System ID of the other end.
Operational key of the other end.
Local end operational key
The mode in which port is added to the group
Port type: standard Ethernet port and fiber-optical distributed data
interface
Port speed type: 10Mbps, 100Mbps, 1,000Mbps and 10Gbps.
Port duplex mode: full-duplex and half-duplex
Port VLAN property: access port or trunk port
Status of port binding status machine
Status of port receiving status machine
Status of port sending status machine
Administrative
1
0x8000
0
0x0100
.
.
1
.
.
162
Operational
0x0101
1
.
1
.
.