Front Brake Fluid Level Inspection - Daytona 675 And Street Triple R - Triumph DAYTONA 675 Service Manual
Triumph daytona 675, street triple and street triple r
Hide thumbs
Also See for DAYTONA 675:
- Owner's handbook manual (158 pages) ,
- Handbook (136 pages) ,
- Manual (47 pages)
Table of Contents
Advertisement
Front Brake Fluid Level Inspection -
Daytona 675 and Street Triple R
A
Warning
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
In accordance with the scheduled maintenance chart,
inspect the brake fluid level in the front and rear master
cylinder reservoirs.
1. Ensure that the brake fluid level in the front brake
fluid reservoir is between the upper and lower level
li nes (reservoir held horizontal).
3
a
1. Front reservoir upper level
2. Front reservoir lower level
3. Safety clip
2.
To adjust the fluid level:
•
Remove the safety clip.
•
Fill the reservoir to the upper level line using
new DOT 4 fluid from a sealed container.
•
Refit the reservoir cover ensuring that the
diaphragm seal is correctly fitted.
•
Refit the safety clip.
Service Manual - Daytona 675, Street Triple and Street Triple R
L UMP
Front Brake Fluid Level Inspection -
Street Triple
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
In accordance with the scheduled maintenance chart,
inspect the brake fluid level in the front and rear master
cylinder reservoirs.
1. Ensure that the brake fluid level in the front brake
fl uid reservoir is between the upper and lower level
li nes (reservoir held horizontal).
/1
2
1. Front reservoir upper level
2. Front reservoir lower level
2. To inspect the fluid level, check the level of fluid
visible in the window at the front of the reservoir
body.
3.
To adjust the fluid level:
•
Release the cap screws and detach the cover
noting the position of the sealing diaphragm.
•
Fill the reservoir to the upper level line using
new DOT 4 fluid from a sealed container.
• Refit the cover, ensuring that the diaphragm
seal is correctly positioned between the cap
and reservoir body. Tighten the cap retaining
screws.
Brakes
A
Warning
1 4.11
Advertisement
Chapters
Table of Contents
