Triumph DAYTONA 675 Service Manual page 168

Lubrication
Refit the oil pump drive chain cover to the oil pump
9.
and fit new bolts. Tighten the bolts to 12 Nm.
1. Oil pump
2. Fixings
3. Drive chain cover
10. Refit the oil pump drive chain guide. Install new
fixings and tighten to 9 Nm.
11. Install a new O-ring to the coolant inlet elbow and
position the elbow to the water pump inlet. Fit a new
bolt and tighten to 9 Nm.
1. Coolant inlet elbow
2. Fixing
8.14 Service Manual - Daytona 675, Street Triple and Street Triple R
12. Install three new O-rings to the coolant outlet pipe
and position the pipe through the crankcase, locating
it to the water pump outlet. Install a new fixing and
ti ghten to 9 Nm.
1. Coolant outlet pipe
2. Fixing
13. Install a new 0-ring to the oil pick-up and refit the oil
pick-up. Fit new bolts and tighten to 12 Nm.
14. Install two new O-rings to the oil transfer pipe and
refit the oil transfer pipe. Fit new bolts and tighten to
12 Nm.
15. Refit the clutch (see page 4-9).
16. Refit the sump, ensuring the water pump drain tube
is correctly installed (see page 8-16).
17. Reconnect the battery, positive (red lead) first.
18. Refit the rider's seat (see page 16-17).
19. Refill the engine with oil (see page 8-7).
Refill the cooling system (see page 11-7 for Daytona
20.
675, or page 11-9 for Street Triple and
Street Triple R).
t uMP