Front Brake Fluid Level Inspection And Adjustment - Triumph Daytona 675 2014 Owner's Handbook Manual

Maintenance and Adjustment
Warning
Brake fluid is hygroscopic which
means it will absorb moisture from the
air.
Any absorbed moisture will greatly
reduce the boiling point of the brake
fluid causing a reduction in braking
efficiency.
Because of this, always replace brake
fluid in accordance with scheduled
maintenance requirements.
Always use new brake fluid from a
sealed container and never use fluid
from an unsealed container or from
one which has been
opened.
Do not mix different brands or grades
of brake fluid.
Check for fluid leakage around brake
installations, seals and joints and also
check the brake hoses for splits,
deterioration and damage.
Always rectify any faults before riding.
Failure to observe and act upon any of
these items may cause a dangerous
riding condition leading to loss of
control and an accident.
108
Front Brake Fluid Level Inspection
and Adjustment
Daytona 675, Daytona 675 R,
Street Triple R and Street Triple Rx
3
previously jajc_3
1. Front brake fluid reservoir
(Daytona 675, Street Triple R and
Street Triple Rx)
2. Front brake fluid reservoir
(Daytona 675 R)
3. Safety clip
4. Reservoir cap fasteners
5. Upper level line
6. Lower level line
The brake fluid level in the reservoirs
must be kept between the upper/max
and lower/min level lines (reservoir held
horizontal).
Remove the safety clip/reservoir cap
fasteners.
Remove the reservoir cap.
Fill the reservoir to the upper level line
using new DOT 4 fluid from a sealed
container.
Reinstall the reservoir cap ensuring that
the diaphragm seal is correctly installed.
Reinstall the safety clip/reservoir cap
fasteners.
4
5
6
2
1