Installation - Triumph DAYTONA 675 Service Manual

Fuel System/Engine Management
7. Disconnect the actuator rod from the intake air flap
and remove the actuator.
1. Actuator
2. Actuator rod removal direction
1 0.102
Service Manual - Daytona 675, Street Triple and Street Triple R

Installation

1. Position the actuator to the intake air duct and
connect the actuator rod to the intake air flap.
1
1. Actuator
2. Actuator rod installation direction
2. Rotate the actuator one quarter turn anti-clockwise to
refit the actuator to the intake air duct.
1. Actuator
2. Actuator installation direction
3. Reconnect the intake air flap actuator vacuum hose.
4. Refit the intake air duct grille.
Refit the cockpit (see page 76-24).
5.
Reconnect the battery, positive (red) lead first.
6.
7. Refit the rider's seat (see page 16-17).
1
I uMP