Exhaustbutterfly Valve Cables - Daytona 675 Only; Removal - Triumph DAYTONA 675 Service Manual

Fuel System/Engine Management
Exhaust Butterfly Valve Cables -
Daytona 675 only

Removal

Warning
If the engine has recently been running, the exhaust
system will be hot. Before working on or near the
exhaust system, allow sufficient time for the exhaust
system to cool as touching any part of a hot exhaust
system could cause burn inj u ries.
Remove the rider's seat (see page 16-17).
1.
Disconnect the battery, negative (black) lead first.
2.
Remove the right hand lower fairing (see page 16-
3.
20).
Remove the cover from the butterfly valve cables on
4.
the actuator.
1. Cover
2. Fixings
1 0.128
Service Manual - Daytona 675, Street Triple and Street Triple R
Slacken both cable adjusters at the actuator to give
5
the maximum amount of slack in the cables.
CON2
1. Actuator
2. Adjusters
Remove the cover from the butterfly valve cables on
6.
the exhaust header.
1. Cover
2. Fixings
Remove and discard the actuator pulley wheel fixing.
7.
1. Actuator pulley wheel
2. Fixing
1 1
II,I MP