Fuellevel Sensor - Triumph DAYTONA 675 Service Manual

Fuel System/Engine Management
Fuel Level Sensor
Fault Code
PO460
Pinpoint Tests
Test
1 Check cable and terminal integrity:
- ECM pin B04
2 Check cable for short circuit:
- ECM pin B04 to ground
3 Check cable continuity:
- ECM pin B04 to sensor pin 1
- Sensor pin 2 to ground
4 Check cable for short circuit:
- Sensor pin 1 to sensor pin 2
5 Reconnect harness, clear fault code
Circuit Diagram
1 0.68
Service Manual - Daytona 675, Street Triple and Street Triple R
Possible cause
Fuel level sensor circuit fault
Result
OK
Faulty
OK
Short circuit
OK
Open circuit
OK
Short circuit
OK
Fault still present
Fuel
Level
Sensor
ECM
B4 BG
Action
View & note 'freeze frame data if
available.
View & note 'sensor' data.
Ensure sensor connector is secure.
Disconnect ECM and
pinpoint test 1:
Action
Disconnect sensor and proceed to test 2
Rectify fault, proceed to test 5
Proceed to test 3
Locate and rectify wiring fault, proceed to test
5
Proceed to test 4
Locate and rectify wiring fault, proceed to test
5
Renew fuel level sensor and proceed to test 5
Locate and rectify wiring fault, proceed to test
5
Action complete, quit test
Contact Triumph service
2
proceed to
I uMP