Licenceplate Light; Bulbreplacement - Triumph DAYTONA 675 Service Manual

9. Remove the direction indicator from the radiator
cowl.
Installation
1. Pass the direction indicator harness through the
radiator cowl and position the direction indicator to
the radiator cowl.
2. Pass the direction indicator harness through the
radiator bracket and align the radiator cowl to its
fixing holes.
Note:
• Ensure the direction indicator harness passes
through the hole in the radiator bracket and
is not trapped by the radiator cowl as it is
installed.
1
teen
1. Radiator bracket
2. Direction indicator harness hole
3. Direction indicator fixing hole
3. Route the direction indicator harness inside the
frame rail to a position above the camshaft cover.
Reconnect the electrical connectors to the main
harness.
4. Install the three radiator cowl fixings and the
direction indicator fixing and tighten as follows:
• Tighten the radiator cowl fixings to 5 Nm.
• Tighten the direction indicator fixing to 4 Nm.
5. Refit the airbox (see page 10-96).
6. Refit the fuel tank (see page 10-90).
7. Reconnect the battery, positive (red) lead first.
Refit the rider's seat (see page 16- 17).
8.
Service Manual - Daytona 675, Street Triple and Street Triple R
IL1MP
Licence Plate Light
Bulb Replacement
1.
Release the screw and detach the licence plate light
from the licence plate bracket.
2. Carefully remove the rubber bulb holder from the
back of the light unit and remove the bulb.
1. Bulb holder
2. Bulb
3.
Installation is the reverse of the removal procedure.
Electrical
1 7.31