Table of Contents
Advertisement
Warning
If the ABS is not functioning, the brake
system will continue to function as a
non-ABS equipped brake system.
In this situation, braking too hard will
cause the wheels to lock resulting in
loss of control and an accident.
Reduce speed and do not continue to
ride for longer than is necessary with
the indicator light illuminated. Contact
an authorised Triumph dealer as soon
as possible to have the fault checked
and rectified.
Inspect the level of brake fluid in
both reservoirs and change the brake
fluid in accordance with scheduled
maintenance requirements. Use only
DOT 4 fluid as recommended in the
Specification section. The brake fluid
must also be changed if it becomes,
or is suspected of having become
contaminated with moisture or any
other contaminants.
Note
A special tool is required to bleed the
ABS braking system. Contact your
authorised Triumph dealer when the
brake fluid needs renewing or the
hydraulic system requires maintenance.
MAINTENANCE
Front Brake Fluid Level Inspection
and Adjustment
Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir,
consult
Triumph dealer for advice before riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and
will
cause
performance potentially leading to loss
of motorcycle control and an accident.
The front brake fluid reservoir is located
on the right hand side handlebar.
1.
Maximum (MAX) level line
2.
Minimum (MIN) level line
To inspect the front brake fluid level:
Check the level of brake fluid visible
▼
in the reservoir.
The brake fluid level must be kept
▼
between the minimum (MIN) and
maximum (MAX) level lines (reservoir
held horizontal).
To adjust the front brake fluid level:
Clean
the
reservoir
▼
removing to prevent dust or dirt
entering the reservoir.
your
authorised
reduced
brake
1
2
cap
before
137
Advertisement
Chapters
Table of Contents
