Triumph DAYTONA 675 Service Manual page 466

Radiator Cowl - Street Triple and
Street Triple R
Removal
1. Remove the rider's seat (see page 16-17).
2. Disconnect the battery, negative (black) lead first.
3. Remove the fuel tank (see page 10-89).
4. Remove the airbox (see page 10-95).
Disconnect the front direction indicator connections,
5.
located under the airbox.
1. Left hand direction indicator connections
2. Right hand direction indicator connections
6. Release the fixing securing the direction indicator to
the radiator cowl.
7. Release the three fixings securing the radiator cowl
to the radiator.
1. Radiator cowl
2. Direction indicator fixing
3. Fixings
8. Remove the radiator cowl and, noting the routing of
the direction indicator harness, carefully feed the
harness through the radiator bracket as the cowl is
removed.
Service Manual -
LUMP
Installation
1. Pass the direction indicator harness through the
radiator cowl and position the direction indicator to
the radiator cowl.
2. Pass the direction indicator harness through the
radiator bracket and align the radiator cowl to its
fixing holes.
Note:
1
cesn
1. Radiator bracket
2. Direction indicator harness hole
3. Direction indicator fixing hole
3. Route the direction indicator harness inside the
frame rail to a position above the camshaft cover.
Reconnect the electrical connectors to the main
harness.
4. Install the three radiator cowl fixings and the
direction indicator fixing and tighten as follows:
•
•
5. Refit the airbox (see page 10-96).
6. Refit the fuel tank (see page 10-90).
7.
Reconnect the battery, positive (red) lead first.
Daytona 675,
Street Triple and Street Triple R
Frame and Bodywork
Ensure the direction indicator harness passes
through the hole in the radiator bracket and
is not trapped by the radiator cowl as it is
installed.
Tighten the radiator cowl fixings to 5 Nm.
Tighten the direction indicator fixing to
4 Nm.
1 6.25