Assembly - Triumph DAYTONA 675 Service Manual

Triumph daytona 675, street triple and street triple r

Hide thumbs Also See for DAYTONA 675:

Table of Contents

Assembly

1. To fully engage the outer drum, insert a suitable tool

to preload and align the primary gear and backlash

eli minator gear through the hole shown in the

ill ustration below.

1. Alignment hole

2. Outer drum

2. Position the clutch outer drum assembly to the input

shaft and align the oil pump drive pegs with the

corresponding holes in the rear of the clutch outer

1. Clutch outer drum

2. Oil pump sprocket drive pegs

3. Oil pump drive holes

Service Manual - Daytona 675, Street Triple and Street Triple R

3. While holding the clutch outer drum in position and

1. Outer drum

2. Bearing sleeve

ensuring correct engagement with the oil pump

drive, refit the bearing sleeve and bearing.

When the bearing sleeve is correctly fitted,

it will be a flush fit with the clutch drum face.

Fit the thrust washer to the shaft.

Fit the clutch inner drum.

Fit the flat washer, a new Belleville washer ('OUT'

mark facing outwards), and refit the centre nut.

Belleville Washer 'OUT' Mark

Table of Contents

Street triple Street triple r