Triumph DAYTONA 675 Service Manual page 179

Triumph daytona 675, street triple and street triple r
Hide thumbs Also See for DAYTONA 675:
Table of Contents

Advertisement

Engine Removal/Refit
8. Remove the left hand centre engine mounting bolt
fitted earlier and recheck the torque on the frame
adjuster, using tool T3880103. Re-tighten the
adjuster to 3 Nm. Refit the bolt, and tighten to
48 Nm.
MM
1. Tool T3880103
2. Centre frame adjuster
9.
Tighten the right hand centre bolt to 48 Nm.
10. Remove the lower rear (gearbox) bolt from the right
hand side and insert it from the left hand side. Fit a
new nut and tighten to 48 Nm.
11. Using tool T3880103, tighten the front frame
adjuster to 3 Nm.
ri
1.Tool T3880103
2. Front upper frame adjuster
12. Fit the upper rear (gearbox) bolt from the left hand
side. Fit a new nut and tighten to 48 Nm.
13. Fit the left hand front bolt and fit a new nut. Tighten
to 48 Nm.
14. Remove the support from beneath the engine.
15. Refit the clutch cable (see page 4-6).
16. Reconnect all electrical connections to the engine.
17. Set the drive chain adjustment (see page 12-7).
18. Refit the gearchange linkage.
9.6
Service Manual - Daytona 675, Street Triple and Street Triple R
19. Refit the sprocket cover and tighten the bolts to
9 Nm.
20.
Fit new seals to the cylinder head. Ensure that the
face of the seal with the tab is facing the cylinder
head.
1. Cylinder head
2. Seal
3. Seal tab
21.
Refit the exhaust system (see page 10-119 for
Daytona 675 or page 10-124 for Street Triple and
Street Triple R).
22.
Refit the radiator (see page 11-14 for Daytona 675
or page 11-16 for Street Triple and Street Triple R).
23.
Fill the engine with oil of the correct grade and
viscosity (see page 8-7).
24.
Refit the throttle bodies (see page 10- 108).
25. Check the throttle cable adjustment (see page 10-
103).
26.
Refit the airbox (see page 10-96).
27.
Refit the fuel tank (see page 10-90).
28. Daytona 675 only: Refit the lower fairings (see
page 16-22).
Refit the rear panel(s) (see page 16-18 for Daytona
29.
675 or page 16-19 for Street Triple and
Street Triple R).
30.
Refit the battery to the battery box and reconnect,
positive (red) lead first (see page 17-15).
31.
Refill the cooling system (see page 11-7 for Daytona
675, or page 11-9 for Street Triple and
Street Triple R).
32.
Remove the motorcycle from the paddock stand and
place on the side stand.
33.
Refit the seats (see page 16-17).
Il1MP

Advertisement

Table of Contents
loading

This manual is also suitable for:

Street tripleStreet triple r

Table of Contents