Triumph DAYTONA 675 Service Manual page 214

Sensor Data
When using this function it is possible to check the status of various sensors and actuators.
The data sets are divided into seven groups - Sensor Voltages; Sensor Readings; Injector Data; Ignition Data; Idle Speed,
Throttle Data and Inputs and Adaption Status. Each of these screens is described on the following pages.
Sensor Voltages
The data available under sensor voltages is:
Item Checked
Battery voltage
Voltage from ignition switch to ECU
Air temperature sensor voltage
Coolant temperature sensor voltage
Atmospheric pressure sensor voltage
Manifold absolute pressure sensor 1 voltage
Manifold absolute pressure sensor 2 voltage
Throttle position sensor voltage
Fuel level sensor voltage
Oxygen sensor output 1 voltage
Exhaust butterfly valve sensor voltage$
4 Applies to models fitted with an exhaust butterfly valve only. All other models will show Not Applicable in this field.
Sensor Readings
The data available under sensor readings is:
Item Checked
Air temperature
Coolant temperature
Atmospheric (barometric) pressure
Short term fuel trimt
Manifold absolute pressure (one reading per cylinder)
Low fuel light
Oxygen sensor 1 short term fuel trim
Oxygen sensor 1 heater status
Exhaust butterfly valve sensor voltaget
t Applies to models fitted with an exhaust butterfly valve only. All other models will show Not Applicable in this field.
Service Manual -Daytona 675, Street Triple and Street Triple R
lliMP
Fuel System/Engine Management
Result Unit
Volts
Volts
Volts
Volts
Volts
Volts
Volts
Volts
Volts
Volts
Volts
Result Unit
°C
°C
mmHg
%
mmHg
on/off
%
on/off
%
1 0.35