Adjust Tune; Freeze-Frame Data - Triumph DAYTONA 675 Service Manual

Adjust Tune

Using the Triumph diagnostic software, it is possible to:
reset the adaptions;
•
balance the throttle bodies.
•
Further functions are provided to allow correct replacement and adjustment of the:
• throttle position sensor;
• idle speed control stepper motor.
These functions are needed as, after replacement of the parts concerned, adjustments have to be made to specific Voltage
settings, with the throttles set in a specific position.
To reset adaptions, see page
To replace and adjust the throttle position sensor, see page
To replace and adjust the ISC stepper motor, see page
To balance the throttles, see page

Freeze-frame Data

Freeze frame data is stored at the time a DTC is recorded (confirmed) by the ECM. If multiple DTCs are recorded, the
freeze-frame data which is stored will relate to the first recorded DTC only.
By calling up freeze frame data associated with the first recorded DTC, the technician can check the engine condition at
the time the fault occurred. The data available is:
Function Examined
DTC
Fuel system status 1
Calculated load
Coolant temperature
Short term fuel trim - bank 1
Intake manifold absolute pressure
Engine speed
Vehicle speed
Ignition advance
Intake air temperature
Throttle position
Oxygen sensor 1 output Voltage
Oxygen sensor 1 short term fuel trim
On
on
1LimP
,,.,
10-115.
10-109.
Service Manual - Daytona 675, Street Triple and Street Triple R
Fuel System/Engine Management
10-110.
10-112.
Result Reported (Scale)
Diagnostic Trouble Code (DTC) number
open or closed loop operation
°C
mm/hg
RPM
km/h
degrees
°C
Volts
1 0.39