Front Brake Fluid Level Inspection And Adjustment - Triumph Street Triple S Owner's Handbook Manual

Front Brake Fluid Level Inspection
and Adjustment
Street Triple RS
Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir, consult
Triumph dealer
riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and will cause
performance potentially leading to loss
of motorcycle control and an accident.
1
2
3
jajc_3
1. Reservoir cap retaining screws
2. MAX level line
3. MIN level line
To inspect the front brake fluid level:
▼ Check the level of brake fluid visible
in the MIN and MAX section of the
reservoir.
▼ The brake fluid level in the reservoir
must be kept between the MAX and
MIN level lines
horizontal).
your authorised
for advice before
reduced brake
(reservoir held
MAINTENANCE
To adjust the brake fluid level:
▼ Release the reservoir cap retaining
screws and remove the reservoir cap
and the diaphragm seal.
▼ Fill the reservoir to the MAX level line
using new DOT 4 brake fluid from a
sealed container.
▼ Fit the diaphragm seal into the
reservoir cap and make sure that the
holes for the fixings in the reservoir
cap and the diaphragm seal are
correctly aligned.
1
3
ckks
1. Reservoir cap
2. Diaphragm seal
3. Reservoir cap retaining screw holes
▼ Install the reservoir cap retaining
screws into the reservoir cap and
diaphragm seal assembly.
▼ Hold the assembly together and
position the reservoir cap, diaphragm
seal and reservoir cap retaining
screws onto the reservoir.
163
2
3