Triumph DAYTONA 675 Service Manual page 403

Front Brake Pads - Street Triple
Removal
A Warning
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1. Unscrew the pad retaining pin plug from the caliper.
c q.
e
\
1. Pad retaining pin plug
2. Loosen the pad retaining pin.
c eqo
1. Pad retaining pin
it
A Warning
Do not allow the calipers to hang on the brake hoses as
this may damage the hoses and could lead to loss of
motorcycle control and an accident.
Slacken and remove the caliper mounting bolts and
3.
slide the caliper off the disc.
I UMP
00
0
00
/
\ \
\
O
^^
^ O D
m
n n
Service Manual -Daytona 675, Street Triple and Street Triple R
4. Remove the pad retaining pin and remove the pads
from the caliper. Take care not to lose the pad
retainer from the mounting bracket or the anti-rattle
spring from the caliper body.
0 0
cegv
00
1. Caliper
2. Brake pad
0
3. Heat isolation pad
0
4. Anti-ratt le spring
0
5. Pad retainer
o0
6. Pad retaining pin
7. Pad retaining pin plug
00
000
Inspection
1. Check the pad retainer, anti-rattle spring and
retaining pin. Renew any component which shows
signs of damage or corrosion.
Check the caliper body slides easily on the mounting
2.
bracket pins and check there is no sign of leakage
from the piston seals. Rectify any problems before
installing the pads.
Note:
• Complete the assembly of the brake pads to
one caliper (see assembly for details) before
removing the pads from the other caliper.
Brakes
C
1
^ 7
2
°
oo°
0
°°00000
3
14.19