Triumph DAYTONA 675 Service Manual page 83

Triumph daytona 675, street triple and street triple r

Hide thumbs Also See for DAYTONA 675:

Table of Contents

23. Rotate the engine through 4 full revolutions, and

reset number 1 cylinder to TDC. Ensure that the

'dot mark on the primary gear aligns with the line at

the bottom of the cover.

1. ' Dot' mark

2. Marker line

24. Check that the camshaft timing marks align as

ill ustrated below.

Camshaft to Cylinder Head Alignment Marks

Service Manual - Daytona 675, Street Triple and Street Triple R

Re-check the tensioner plunger location against the

camshaft drive chain tensioner blade.

Refit the camshaft cover (see page 3-8).

Fit a new gasket to the right hand crank cover.

Noting the position of the bolt fitted with the copper

washer, refit the crank cover, tightening the fixings to

1. Right hand crank cover

2. Copper washer position

Cylinder Head

Chapters

Table of Contents

Street triple Street triple r