RUN Position
The engine start/stop switch must be in
the RUN position for the motorcycle to
operate.
START Position
The START position operates the electric
starter allowing for a quicker engine
start.
From the ignition off, press and hold the
engine start/stop switch in the START
position with all the correct conditions
met, to start the motorcycle.
For more information, see the Starting
the Engine section.
HOME Button
The HOME button is used to access the
main menu on the instrument display.
Press and release the HOME button
to select between the main menu and
instrument display.
All
messages
the
instrument
acknowledged by pressing the Joystick
centre before the HOME button can be
operated.
that
appear
in
display
must
be
GENERAL INFORMATION
Left Handlebar Switches
9
10
8
7
6
ckdf
1.
Cruise control adjust switch (if fitted)
2.
Daytime Running Lights (DRL) switch
(if fitted)
3.
MODE button
4.
Direction indicator switch
5.
Joystick button
6.
Horn button
7.
Heated grips switch (if fitted)
8.
Front fog lights switch (if fitted)
9.
High beam button
10. Rider's heated seat switch (if fitted)
Cruise Control Adjust Switch
(if fitted)
The cruise control adjust switch is a two
way switch with the top marked RES/+
and the bottom marked SET/-.
For more information on cruise control
operation, see page 62.
Daytime Running Lights (DRL)
Switch (if fitted)
When the ignition is switched
ON and the daytime running
lights switch is set to DRL
mode, the daytime running
lights warning light will illuminate.
57
1
2
3
4
5