Left Handlebar Switches; Cruise Control Adjust Button; Daytime Running Lights (Drl) Switch (If Equipped) - Triumph Speed Triple 1200 RR 2022 Owner's Handbook Manual

Left Handlebar Switches

7
6
1. Cruise control adjust switch
2. Daytime Running Lights (DRL) switch
(if equipped)
3. MODE button
4. Turn signal switch
5. Joystick button
6. Horn button
7. High beam button
The following sections describe the
handlebar buttons
functions.

Cruise Control Adjust Button

The cruise control adjust button is a
two way switch with the top marked
RES/+ and the bottom marked SET/-.
For more information on cruise control
operation, see page 66.
Daytime Running Lights (DRL)
Switch (if equipped)
When the ignition is switched
ON and the daytime running
lights switch is set to DRL
mode, the daytime running
lights warning
illuminate.
1
2
3
4
5
and switches
light will
GENERAL INFORMATION
The daytime running lights and low
beam headlights are operated manually
using the DRL switch. Push the switch
forward to the top for DRL mode, and
push the switch rearward to the bottom
for low beam headlight mode.
Warning
Do not ride for longer than necessary
in poor ambient light conditions with
the Daytime Running Lights (DRL) in
use.
Riding with the daytime running lights
when dark, in tunnels or where poor
ambient light is apparent may reduce
the riders vision or blind other road
users.
Blinding other road users or reduced
vision in low ambient light levels may
result in loss of motorcycle control and
an accident.
Note
During daylight hours the daytime
running lights improve the motorcycles
visibility to other road users.
Low beam headlights must be used
in any other conditions unless the
road conditions allow for high beam
headlights to be used.
61