Minimum Startup Configuration - Fujitsu PRIMERGY GX2570 M6 Upgrade And Maintenance Manual

Appendix A
17.4

Minimum startup configuration

Field Replaceable Units
(FRU)
If the server does not start up or other problems occur, it may be necessary to
take the system down to its most basic configuration in order to isolate the
defective component.
The minimum startup configuration consists of the following components and
cables:
Component
System board
2 CPUs with CPU heat
sink
1 memory module
4 PSUs
Table 4: Minimum startup configuration - components
Cable
Front panel cable
Power cable
Table 5: Minimum startup configuration - cables
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Take the system down to its minimum startup configuration.
▶
"Connecting the power cord" on page
▶ Connect a display to the server.
▶ Switch on the server, see
272
Notes
no TPM or expansion cards installed
installed in CPU slots CPU 1 and CPU 2
installed in DIMM slot 1A
installed in PSU bays PSU 1 to PSU 4
Notes
40.
48.
"Switching on the server" on page
Upgrade and Maintenance Manual
40.
49.
GX2570 M6