Additional Tasks; Mounting Expansion Card Slot Brackets; Required Tools - Fujitsu PRIMERGY TX100 S3 Maintenance Manual

Expansion cards and backup units
9.4

Additional tasks

I
For further instructions regarding controller settings, please refer to the
accompanying documentation.
9.4.1

Mounting expansion card slot brackets

Upgrade and Repair Units (URU)
Average task duration: 5 minutes
This section provides general instructions on mounting slot brackets as well as
specific instructions for the following network adapters:
"Network adapter D2735" on page 192
●
"Network adapter D2745" on page 194
●
"Network adapter D2755" on page 196
●
"USB 3.0 interface card D3305" on page 198
●
9.4.1.1

Required tools

Mounting slot brackets:
●
– Phillips PH2 / (+) No. 2 screw driver
190 Upgrade and Maintenance Manual
TX100 S3