9.4
Additional tasks
This section provides additional expansion card related information on how to
install slot brackets and SFP+ transceiver modules.
I
For further instructions regarding controller settings, please refer to the
accompanying documentation.
9.4.1
Mounting expansion card slot brackets
Customer Replaceable Unit
(CRU)
Preliminary and concluding steps: tool-less
Tools:
Mounting slot brackets: Phillips PH2 / (+) No. 2 screw driver
This section provides general instructions on mounting slot brackets as well as
specific instructions for the following network adapters:
"Network adapter D2735" on page 201
●
"Network adapter D2745" on page 203
●
"Network adapter D2755" on page 205
●
TX1320 M1
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
199