Additional Tasks; Mounting Expansion Card Slot Brackets; Required Tools - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

Expansion cards and backup units
9.4

Additional tasks

This section provides additional expansion card related information on how to
install slot brackets and SFP+ transceiver modules.
I
For further instructions regarding controller settings, please refer to the
accompanying documentation.
9.4.1

Mounting expansion card slot brackets

Upgrade and Repair Units (URU)
Average task duration: 5 minutes
This section provides general instructions on mounting slot brackets as well as
specific instructions for the following network adapters:
"Network adapter D2735" on page 278
●
"Network adapter D2745" on page 280
●
"Network adapter D2755" on page 282
●
9.4.1.1

Required tools

Preliminary and concluding steps: tool-less
●
Mounting slot brackets:
●
– Phillips PH2 / (+) No. 2 screw driver
276 Upgrade and Maintenance Manual
TX140 S1