Ignition Coil Removal/Installation [Z6] - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Ignition coil
1 (See IGNITION COIL REMOVAL/INSTALLATION
(See IGNITION COIL INSPECTION
Spark plug
2 (See SPARK PLUG REMOVAL/INSTALLATION
(See SPARK PLUG INSPECTION.)

IGNITION COIL REMOVAL/INSTALLATION [Z6]

1. Remove the battery cover. (See
2. Disconnect the negative battery cable.
3. Remove the air cleaner. (See
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Downloaded from
[LF].)
[LF].)
[LF].)
BATTERY REMOVAL/INSTALLATION
INTAKE-AIR SYSTEM REMOVAL/INSTALLATION
https://carmanualshub.com/
[Z6].)
[Z6].)
- automotive repair manuals website
B3E011801009W03