Show Dot1X - Cisco Catalyst 3030 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands

show dot1x

Use the show dot1x user EXEC command to display IEEE 802.1x statistics, administrative status, and
operational status for the switch or for the specified port.
Syntax Description
all [summary]
interface interface-id
details
statistics
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
If you do not specify a port, global parameters and a summary appear. If you specify a port, details for
that port appear.
If the port control is configured as unidirectional or bidirectional control and this setting conflicts with
the switch configuration, the show dot1x {all | interface interface-id} privileged EXEC command
output has this information:
ControlDirection
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output appear.
Examples
This is an example of output from the show dot1x user EXEC command:
Switch> show dot1x
Sysauthcontrol
Dot1x Protocol Version
Critical Recovery Delay
Critical EAPOL
This is an example of output from the show dot1x all user EXEC command:
Switch> show dot1x all
78-17262-01
show dot1x [{all [summary] | interface interface-id} [details | statistics]] [ | {begin | exclude |
include} expression]
(Optional) Display the IEEE 802.1x status for all ports.
(Optional) Display the IEEE 802.1x status for the specified port (including
type, module, and port number).
(Optional) Display the IEEE 802.1x interface details.
(Optional) Display IEEE 802.1x statistics for the specified port.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
= In (Inactive)
Enabled
2
100
Disabled
Cisco Catalyst Blade Switch 3030 Command Reference
show dot1x
2-289