Show Vlan Filter - Cisco Catalyst 3030 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands

show vlan filter

Use the show vlan filter privileged EXEC command to display information about all VLAN filters or
about a particular VLAN or VLAN access map.
Syntax Description
access-map name
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show vlan filter command:
Switch# show vlan filter
VLAN Map map_1 is filtering VLANs:
20-22
Related Commands Command
show vlan access-map
vlan access-map
vlan filter
78-17262-01
show vlan filter [access-map name | vlan vlan-id] [ | {begin | exclude | include} expression]
(Optional) Display filtering information for the specified VLAN access map.
(Optional) Display filtering information for the specified VLAN. The range is
1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Description
Displays information about a particular VLAN access map or for all
VLAN access maps.
Creates a VLAN map entry for VLAN packet filtering.
Applies a VLAN map to one or more VLANs.
Cisco Catalyst Blade Switch 3030 Command Reference
show vlan filter
2-415